Vaporesso GTX V2 Coils – Premium replacement coils for Switzerland
Vaporesso GTX V2 Coils offer you a high-quality replacement solution for your Vaporesso device. The coils deliver clear flavor and consistent vapor production in devices such as the LUXE XR Max and other compatible Vaporesso tanks.
In Switzerland, these replacement coils offer you reliable quality (manufacturer Vaporesso, CE/CH compliant) and a wide selection of resistances for direct-to-lung (DTL) and mouth-to-lung (MTL) vaping.
What are Vaporesso GTX V2 coils?
Vaporesso GTX V2 coils are replaceable atomizer heads for Vaporesso e-cigarettes and tanks from the GTX platform. The coils consist of a mesh heating element and a combination of cotton and fiber fabric. This design ensures fast heating, even liquid supply, and intense flavors.
Each coil is a wear part. The coil can be changed without tools (push-fit system, depending on the tank/pod).
Why are GTX V2 coils useful for Vaporesso users in Switzerland?
The GTX V2 coils enhance the flavor and efficiency of your Vaporesso device. The mesh creates more contact surface with the liquid and thus more flavor. The optimized cotton keeps the liquid clean instead of burning it selectively.
You can choose the coil that suits your vaping style: from very low resistances (strong vapor, high power, DTL) to higher resistances (economical, MTL, discreet). Typical ranges are from approx. 0.15 Ω to approx. 1.2 Ω.
For you as a vaper in Switzerland, this means you get a stable supply of original coils, local advice on performance and wattage, and a clearly regulated age restriction of 18 years and older.
How do you use the GTX V2 coils step by step?
-
Turn off the device: First, turn off your Vaporesso device (e.g., LUXE XR Max).
-
Open the tank/pod: Remove the pod or open the tank according to the instructions.
-
Remove the old coil: Pull the used GTX coil straight out.
-
Insert new coil: Press the new GTX V2 coil firmly into the coil shaft (push-fit). Make sure it is seated properly.
-
Prepare the coil (priming): Apply a few drops of your e-liquid directly to the visible cotton openings of the coil. Then fill the tank/pod.
-
Waiting time: Let the coil rest for 5–10 minutes. This allows the cotton to fully absorb the liquid.
-
Set the wattage: Set your device to the recommended power range for the coil you are using (example: a 0.15 Ω coil is typically operated at around 60–75 W). Start at the lower end of the range.
-
Start vaping: Switch on the device and slowly increase the power to your desired level.
Important: A correctly prepared coil prevents dry hits (burnt taste) and extends its service life.
Who are GTX V2 coils suitable for – and who are they not suitable for?
Suitable for:
- Vapers with Vaporesso devices such as LUXE XR Max, LUXE X Pro, or GTX Tank 22 who want to get the most flavor out of their device.
- Vapers who want to consciously switch between DTL (open, direct lung draw) and MTL (classic "cigarette-like" draw).
- Users in Switzerland who prefer original parts with documented quality and traceable origin.
Not suitable for:
- Users of systems without replaceable coils (closed disposable pods).
- Occasional vapers who do not require dense vapor or intense flavor – a standard coil is often sufficient here.
- Devices that are technically unable to deliver higher wattages. A low-resistance coil requires sufficient power, otherwise it will not perform properly.
What legal issues apply in Switzerland?
The sale of e-cigarettes, liquids, and replacement coils such as the Vaporesso GTX V2 coils is restricted to adults in Switzerland (protection of minors). The products are intended for adult smokers and vapers.
There is no separate licensing requirement for the possession or replacement of coils. The coils are considered replacement or wear parts for your existing e-cigarette system.
Please do not dispose of used coils in normal household waste. Metal and plastic parts belong in the local waste disposal system (electronic waste/collection point).
What does a practical example from Switzerland look like?
A vaper from Zurich uses the Vaporesso LUXE XR Max together with a GTX V2 0.4 Ω mesh coil at approx. 30 W. After changing the coil, he reported a more intense flavor, stable flow, and quick installation in under two minutes thanks to the push-fit design.
This real-life setup shows how a simple coil replacement improves daily use: more flavor, less scratching, more consistent vapor.
Checklist: Am I ready for GTX V2 coils?
- I have a compatible Vaporesso device (e.g., LUXE XR Max, GTX Tank 22).
- I want clear flavor and dense vapor instead of "it's okay."
- I am ready to replace the coil as soon as the flavor diminishes.
- I use the right e-liquid (for low ohm values, a higher VG content for DTL).
- I know the recommended wattage range for my coil and stick to it.
If you can check off most of these points, the Vaporesso GTX V2 coils are right for you.
What variants of the GTX V2 coils are available – and which one is right for me?
Choosing the right coil depends on your vaping style, your preferred power (watts), and your desired draw behavior. The following table will help you decide:
| Variant / Solution | Most important advantage | Suitable for | Typical cost/effort |
|---|
| GTX V2 0.15 Ω Mesh (approx. 60–75 W) | Maximum vapor volume and very intense flavor | Experienced DTL users with powerful mods | Plan for regular coil replacement |
| GTX V2 0.4 Ω Mesh (approx. 26–32 W) | Balanced: good flavor at moderate power | Daily use without extremely high wattage | Medium effort |
| GTX V2 1.2 Ω Mesh (approx. 7–11 W) | Economical consumption, discreet draw (MTL) | Smokers who are switching and prefer a tight draw | Low effort, long service life per coil |
| Standard third-party coil (>1 Ω) | Low entry price | Occasional vapers who don't focus on vapor volume | Easy to replace, but flavor is often weaker |
Frequently asked questions about Vaporesso GTX V2 coils
Are GTX V2 coils compatible with my Vaporesso LUXE XR Max?
Yes, the GTX V2 coils are designed for many Vaporesso devices on the GTX platform, such as the LUXE XR Max. However, for special tanks or older models, check the manufacturer's specifications to avoid making the wrong purchase.
How often do I need to change the coil?
You should change the coil as soon as the flavor seems flat or "burnt" or the vapor significantly decreases. In practice, depending on the liquid and power, this happens after a few days to about two weeks of continuous use.
Does all this also apply in Switzerland?
Yes, the use of Vaporesso GTX V2 coils is legal in Switzerland as long as you are of legal age. Sale to minors is not permitted. The Swiss age limit also applies to online purchases.
How much does a pack of GTX V2 coils cost (as of 2025)?
Based on experience, a multipack (e.g., 5 pieces) costs around CHF 10–15, depending on the resistance and retailer. Prices are subject to change, so it is worth checking with a Swiss retailer for the latest prices.
What are the risks of using the wrong wattage?
A wattage that is too high or too low can damage the coil, destroy the flavor, or, in extreme cases, put stress on your device. Example: A coil with 0.15 Ω is designed for high power (around 60–75 W). If you go much higher, the cotton will burn very quickly. If you stay much lower, there will be hardly any vapor and the coil will tend to "leak."
How up-to-date is this information?
The information on performance, price ranges, and usage profiles is current as of October 2025. New device revisions or new coil series from Vaporesso may change individual values.
Why should you use GTX V2 coils now?
The Vaporesso GTX V2 coils get noticeably more flavor, vapor, and reliability out of your Vaporesso device. You get resistances tailored to your style – from intense DTL to discreet MTL.
Our team of experts (Switzerland, specialized vape retailer, documented advice on performance, liquids, and coil care since 2021) will help you find the right resistance, wattage setting, and correct installation. This will help you avoid bad purchases and unnecessary coil wear costs.
Request your personal quote now or visit us in Switzerland to find out which GTX V2 coil is right for your device.
