Steampipes - Corona V8 MTL Stainless Steel
Steampipes has listened to you and is launching the popular Corona V8 as an MTL version. ��
The tank is partly made of matte polycarbonate. To create a small vapor chamber, the coil deck is covered on one side with an insulator. The Corona V8 MTL is a pure single coil atomizer.
The airflow control with the modified top cap is limited to three small holes on one side. The airflow can be adjusted by turning the top cap.
The tank is filled via a hole on the side, which is revealed after removing the top cap.�
The Corona V8 MTL naturally comes with a specially designed stainless steel MTL drip tip.
The positive pole is adjustable.
The Corona V8 MTL can optionally be converted to the classic Corona V8 with the matching top cap.
Note: The coil should be fitted exactly between the screws in terms of height!
The Corona V8 is delivered without heating wire and glass fiber.�
�
ATTENTION: Thisis a self-winding vaporizer. The coil must therefore be attached by you.
Details:
- Made from food-safe 1.4301 stainless steel
- Diameter 23 mm
- Polycarbonate top cap
- Top fill system. Fill via a tank nozzle.
- 8 ml filling volume with 4x ES rope 3 mm as wicks
- Drip tip�
- Velocity deck, 4 wire holders, each with a 2.1 mm bore. Slotted grub screws.
- Complete deck made of PEEK plastic
- Wick holes for 3mm ES rope as wicks
- Recessed positive pole
- Tank shield to protect the tank
- Polycarbonate tank
- AirFlowControl for adjusting the draw resistance
- Adjustable positive pole
- All parts can be dismantled
Scope of delivery:
1x Corona V8 MTL RTA fully assembled
1x O-ring set Corona
2x Replacement screws Pole
1x screwdriver
4x ES rope 3mm, cleaned
1x Waterproof plastic box
