XTAR - X2 LCD charger for 2 batteries
The X series from xTar shines with its multifunctionality.
The new X2 has a three-stage charging cycle, which is particularly gentle on the batteries.
It can charge two batteries simultaneously with 1A each.
Special attention is paid to the revival mode: If a battery has been unused for too long or has been used for too long (deep discharge) and can no longer be recognized or charged by most devices, the X2 can "revive" such a battery and then charge it again. (However, caution is advised with lithium-ion batteries, as deep-discharged batteries below 2.4V can lead to a loss of capacity and discharges below 1.5V can be potentially dangerous. To be on the safe side, such batteries should be taken to a specialist store for disposal. Attention: Rechargeable batteries do not belong in the battery disposal!)
Specifications:
Model designation: X2
Input: AC 100-240V / 50/60Hz / 0.4A or DC 5V/2.1A
Power supply: C7 connection cable / Micro USB
Charging current: 2*1A / 1*2A / 2*0.5A
Final voltage: 4.20V±0.05V / 1.45V±0.1V
Final current 0.5A: =70mA
Final current 1A/2A: =130mA
Operating temperature: 0-40°C
Dimensions: 135*75*38
Weight: 125g
The device reliably charges IMR/INR/ICR 14500/14650/16340/17355/17500/ 17670/18350/18490/18500/18650/18700/20700/21700/22650/25500/26650 lithium-ion batteries
and
A/AA/AAA/AAAA/SC/C Ni-MH/Ni-CD batteries
- X2 charger
- Connection cable
- Manual
| Produced in: | China |
| Item weight: | 0,30 kg |
There are no reviews yet.

